isometric isometric title scale date dr dwg rev the information contained in this document is proprietary to e-switch and is not to be copied or transferred sheet of rev pcr no description date by 100dp3t1b1m2reh 2:1 9/2/2011 ST110026 a bma 1 1 note: 1. all dimensions in mm [inch] 2. general tolerance: x.x=0.4 x.xx=0.25 3. terminal numbers for ref only 4. plating material: gold 5. rating: 5amps w/resistive load @ 120vac or 28vdc 2 amps w/ resistive load @ 250vac 6. electric life: 40,000 make-and-break cycles at full load. 7. insulation resistance: 1,000 mega-ohm min. 8. dielectric strength: 1,000 v rms @sea level. 9. operating temp.: -30c to 85c 10. denotes critical parameter. 11. 2002/95/ec (rohs) compliant 12. hardware to be shipped bulk: t100011 - lock washer, qty 1 t100015 - lock ring, qty 1 t100000 - hex nut, qty 2 pos. 1 pos. 2 pos. 3 switch function off on on 2-3 open 2-1 2 13 circui: dpdt on on e-switch marking on opposite side 12 3 3 8.89 [.350 in] 12.70 [.500 in] 11.43 [.450 in] 6.60 [.260 in] 6 off 5 46 1/4-40 uns-2a threads 2.92 [.115 in] n 8.89 [.350 in] 10.41 [.410 in] 25 ~ pos. 1 pos. 2 pos. 3 4.83 [.190 in] .76 [.030 in] 4.70 [.185 in] a 20126 new part release 09/02/11 bma
|
